Chains for Forklift

Chain for Forklift - The life of lift chains on forklifts could be extended significantly with good maintenance and care. Like for instance, correct lubrication is the most effective method to be able to prolong the service capability of this particular component. It is really essential to apply oil periodically with a brush or other lube application device. The frequency and volume of oil application must be sufficient so as to avoid any rust discoloration of oil within the joints. This reddish brown discoloration usually signals that the lift chains have not been properly lubricated. If this particular condition has occurred, it is extremely important to lubricate the lift chains right away.

Through lift chain operation it is normal for some metal to metal contact to occur which can result in several components to wear out in due course. As soon as there is 3 percent elongation on the lift chain, it is considered by industry standards to have worn out the chain. In order to stop the scary likelihood of a catastrophic lift chain failure from occurring, the maker greatly recommends that the lift chain be replaced before it reaches 3 percent elongation. The lift chain lengthens due to progressive joint wear that elongates the chain pitch. This elongation can be measured by placing a certain number of pitches under tension.

One more factor to ensuring proper lift chain maintenance is to check the clevis pins on the lift chain for indications of wear and tear. The lift chains have been assembled so that the tapered faces of the clevis pin are lined up. Usually, rotation of the clevis pins is commonly caused by shock loading. Shock loading happens if the chain is loose and then suddenly a load is applied. This causes the chain to experience a shock as it 'snaps' under the load tension. With no correct lubrication, in this particular situation, the pins could rotate in the chain's link. If this situation happens, the lift chains have to be replaced right away. It is imperative to always replace the lift chains in pairs in order to ensure even wear.


Click to Download the pdf

Forklift Parts

Parts for Container Handlers

Part for Container Handler - Shipping containers form the basis of containerization. This is a transfer system based on a range of steel intermodal containers that are usually called "shipping containers." These containers are built to certain standard dimensions which can be stacked and transported, unloaded and loaded with optimum efficiency over long distances. Shipping containers are usually transported by...

More

---

Clark Forklift Attachments

Clark Forklift Attachment - Performing worldwide, there are currently 350,000 Clark forklifts and lift trucks in operation, with more than 250,000 of those operating in North America. Clark has five main lines of forklifts across the world, making it one of the most expansive organizations in the industry. Heavy duty vehicles ranging from 1,500lb to 18,000lb capacities, duel fuel, petrol,...

More

---

Independent Fork Positioner

Independent Fork Positioners - A fork positioner is actually an apparatus made out of high quality materials designed to be able to endure the most challenging procedures and work environments. This piece of equipment can enable the individual driving to be able to maneuver the forks hydraulically without leaving the seat. Side shifting models have the extra ability to laterally...

More

---

Telehandler Parts

Parts for Telehandlers - The telescopic handler or telehandler is a commonly used equipment in agricultural and industrial applications. This particular machine is similar in look to a forklift and even works in a similar manner, although telehandlers are much more like a crane than forklift. It has a telescopic boom that could extend upward and forwards from the motor...

More

---

Aerial Lift Attachment

Aerial Lift Attachments - Aerial jacks can accommodate many duties involving high and tough reaching spaces. Sometimes used to complete routine preservation in structures with lofty ceilings, trim tree branches, raise heavy shelving units or mend phone cables. A ladder could also be used for some of the aforementioned tasks, although aerial lifts provide more security and stability when correctly...

More

---

Differential for Forklifts

Forklift Differentials - A differential is a mechanical device that could transmit rotation and torque through three shafts, often but not always using gears. It usually operates in two ways; in cars, it provides two outputs and receives one input. The other way a differential works is to combine two inputs to generate an output that is the difference, sum...

More

---

Narrow Aisle Forklift Parts

Parts for Narrow Aisle Forklift - Few people at first were able to see the impact that container shipping will have in the shipping business. One economist during the 1950s, namely Benjamin Chinitz of Harvard University, predicted that containerization would have greatly benefit New York, by enabling it to ship more effectively to the southern parts of the United States....

More

---

Clamp Forklift Attachment

Clamp Forklift Attachments - Using lift trucks on the jobsite could guarantee the safety of employees by significantly decreasing their physical workload. In whichever industry or factory, worker safety is the main concern. Supplies need to be transported, stored and lifted within the premises without causing any injury to all the staff. Lift trucks are usually utilized in distribution centers...

More

---